Aluminum fan with high-tension

1. Two-stage upper and lower lift of ventilation part
2. Capable of adjusting the height of the first stage boom of the ventilation part to control wide range [Maximum height: 5,043 mm]
3. Capable of adjusting the upper-lower spraying angle of the second stage boom of the ventilation part in the range of 70 degrees, making the upper-lower spraying angle to be wide
4. Capable of adjusting the left-right spraying angle of the second stage boom of the ventilation part in the range of 320 degrees, making the left-right spraying angle to be wide

Long-distance spraying

1. Long-distance spraying with straightness and abundant volume of wind using high-tensile aluminum fan
2. Influence of external air volume and wind pressure minimized by a super-large axial fan
3. Equipped the lower nozzle at the lower part of the air vent to perform short- and long-distance control work

2,500 liters of large-capacity tank, strong engine of 85 horsepower

Efficient for large-scale control work [Hyundai water cooling 4-cylinder turbo diesel engine]

Sensor for self-diagnosis

Sensors for self-diagnosis are mounted on key components to identify faulty part

Wired/wireless remote control complex system

Wired or wireless controls are available to control on the driver's seat or remotely; and operator safety secured (capable of transmitting/receiving over 1 km)

Drives large-capacity hydraulic motor type ventilation fan

High-speed rotation and long-distance control are possible using a large-capacity piston motor.

Control situation monitoring

With 7-inch LCD monitor and high-definition camera on the top of the ventilation part, allowing the driver to check the situations of the control through the monitor

Automatic hose reel

1. Generous hose length of 13 mm in diameter for control up to 150 m
2. With 12 volt, 200 watts powerful motor and hose alignment device, no hose twist
3. Remote control type; capable of winding hose by wireless control when controlling long-distance [transmitting/receiving distance of 250 m]

Power hose gun

1. A hose with a diameter of 13 mm that allows direct spraying control; a maximum spraying distance of 20 m
2. Can be selected and installed depending on the situation of the left and right sprayers

High-capacity hydraulic oil automatic cooler

1. Oil cooler: selectable either auto or manual mode
2. Equipped with an automatic oil temperature sensor to maintain the proper temperature of hydraulic oil

Can be mounted on vehicles and trailers

1. Can be loaded on trucks larger than 2.5 tons
2. Can be loaded on trailers of 50 horsepower or higher